Perform the following steps to upgrade the instrument firmware: NOTE: For use ONLY with the following PRISM products: * MPI2-25 and MPX2-25 (10/25GE products) * MPI2-10 and MPX2-10 with 25GE upgrade kit * MPI and MPX with 25GE upgrade kit 1. Copy the upgrade file with a .bin file extension from the upgrade package onto a USB memory device. You will need approximately 1.2 GB of available space on the USB device. 2. Insert the USB memory device into a USB port on the PRISM monitor. 3. On the PRISM monitor, select the Settings (gear) icon to open the Settings menu. 4. Select Utilities to open the Utilities submenu. 5. Select Firmware Upgrade. The display will list all of the files on the USB device with a .bin file extension. 6. Select the desired file in the list to select it, and then touch Install to start the upgrade. 7. While the upgrade is in process, a message box appears stating that the firmware installation is in progress 8. When the upgrade is complete, the instrument will reboot and complete the installation of the upgrade. 9. Remove the USB device from the PRISM monitor. Perform the following procedure to verify the firmware upgrade: 1. Select the Settings (gear) icon to open the Settings menu. 2. Select Utilities to open the Utilities submenu. 3. Select Version to open the Version display. 4. Verify that the displayed firmware version number matches the version of the firmware upgrade package you installed.