PRISM Series Firmware Release – V2.3.1

Compatible with the following PRISM Series Products: MPI/MPX, MPI2/MPX2-10, MPI2/MPX2-25

New features:

• User configurable alarms with adjustable thresholds:
  • Gamut/R103 alarms
  • Audio content alarms
  • CC / Subtitles alarms
  • IP transport alarms
  • SDI transport alarms
  • Timing alarms
  • Video format alarms
• User interface enhancement Activity Dashboard for easy user alarm monitoring
• Eventlog enhancements:
  • Filters for alarms, alarm group, and time and date
  • Events logged with ANC LTC/VITC timecode and PTP time
  • Events now logged with user defined input names
• Web download of Eventlog as a csv file
• Additional Alarm reporting support:
  • Web based Alarm Status
  • RFC5424 compliant Syslog events
  • SNMP trap for alarms
• Support for Gamut measurements, compliant with EBU R 103 V3.0 recommendation, with user configurable thresholds
• Audio decode of Dolby D/D Plus/E with Dolby Status application:
  • Support for SDI, 2022-6 and 2110-31 transports
  • SDI Aux out support includes Dolby embedding
• RTW Surround Sound display for PCM and decoded Dolby D/D Plus/E audio

Release Notes – V2.3.1

Installation Instructions – V2.3

PRISM Series Firmware Release – V2.2

Compatible with the following PRISM Series Products: MPI/MPX, MPI2/MPX2-10, MPI2/MPX2-25

• Must Watch!! New user interface introduction

New features:

• Support for RGB 444 10/12 bit Full/Narrow range: ¹
  • 3G-SDI Level A/B (requires option PROD)
  • Quad 3G-SDI Level A/B, 12G-SDI (requires option PROD and FMT-4K)
• Multiple ST 2110-30 stream reception: ¹
  • Up to four ST 2110-30 streams
  • Up to 16 audio channels in total
  • AUX SDI Output as SDI embedded audio
• SCTE104 decoding (requires option ENG-MEAS or QC):
  • Review the last 10 ST2010 ANC packets
• Downmix for 5.1. and 7.1 multi-channel audio program with Solo mode.
• Four trace tiles for HD/3G input.
• Anamorphic picture in SD.
• Upload and download presets from USB and web.
• Updated User Interface for application selection and preset operation.

¹ Requires MPI2-25 or MPX2-25 products, or other PRISM products with option 25GE installed.

Release Notes – V2.2
Older release notes: V2.1.1 V2.0.2, V2.0.1, V1.10.4, V1.10.2, V1.9.1

Installation Instructions – V2.2

PRISM Series Firmware Release – V2.1.1

Compatible with the following PRISM Series Products: MPI/MPX, MPI2/MPX2-10, MPI2/MPX2-25

New features and improvements:

• 8K quad SDI inputs on MPI2/MPX2-25 and products with 25G upgrade kit
• Dolby E Guard Band measurements
• Decode of Dolby E metadata transmitted over ancillary data packets
• Audio loudness readout
• New Anc Session application to monitor ancillary data transmitted over SDI and IP signals
• Light meter measurements on the picture display
• Source ID picture overlay
• Timecode readout
• Closed Captions / Subtitle decode for CEA-608, CEA-708, OP-47, and ST2031

Release Notes – V2.1.1
Older release notes: V2.0.2, V2.0.1, V1.10.4, V1.10.2, V1.9.1

Installation Instructions – V2.1.1

PRISM 25GE Firmware Release – V2.0.2

NOTE: For use ONLY with PRISMs with 25GE Media Analysis input board installed, including MPI/MPX and MPI2/MPX2 products. NOT COMPATIBLE with PRISMs with 10GE Media Analysis input board installed.

New features and improvements:

• User interface has been rebranded to Telestream.
• Telestream licensing is now supported along with existing Tektronix licenses. No action is required if your product has existing Tektronix licenses.

Release Notes – V2.0.2
Older release notes: V2.0.1

Installation Instructions – V2.0.2

PRISM Firmware Release – V1.10.4

NOTE: For use ONLY with PRISMs with 10GE Media Analysis input board installed, including MPI/MPX and MPI2/MPX2 products. NOT COMPATIBLE with PRISMs with 25GE Media Analysis input board installed.

New features and improvements:

• User interface has been rebranded to Telestream.
• Telestream licensing is now supported along with existing Tektronix licenses. No action is required if your product has existing Tektronix licenses.

Release Notes – V1.10.4
Older release notes: V1.10.2, V1.9.1, V1.8.2

Installation Instructions – V1.10.4